Chapter 4: Printing Cards
Before Starting to Print
This section explains how to print a card to a printer. Make sure that:
Cards are loaded in the printer or available to insert.
•
Ribbon is loaded in the printer. For the steps to follow, refer to "Load the
•
Print Ribbon" on page 19.
The card design is set up. If you need to set up or modify the design, refer to
•
"Elements of Card Design" in your card printer's Installation and
Administrator's Guide.
H
& T
INTS
Make sure that magnetic stripe cards are loaded correctly. The printer shows the
correct position.
You also can:
Print a test card directly from the printer. Refer to "Print a Test Card" on
•
page 17.
Print a driver sample card. Refer to "Printing a Driver Sample Card" in your
•
card printer's Driver Guide.
SD/CD Series Card Printers User's Guide
IPS
23