4.
Load a full roll of print ribbon onto the
spindle closest to the cartridge handle.
5.
Place the empty spool on the spindle with
the black gear.
6.
Wind the empty spool counterclockwise
one full turn.
Load the Cleaning Sleeve
Load a new cleaning sleeve with each new roll
of print ribbon.
The printer ships with the cleaning roller
spindle installed on the print ribbon cartridge.
1.
Remove the cleaning roller spindle from
the ribbon cartridge and slide the spindle
into the continuous cleaning sleeve (a).
2.
Place the spindle with the cleaning sleeve
onto the ribbon cartridge (b).
3.
Remove the protective wrapper from the
cleaning sleeve (c).
20
Using the System