8B–10 WIPER/WASHER SYSTEM
Removal
1. Remove the arm nut(2).
2. Remove the wiper arm/blade(1).
Removal
1. Disconnect the hose(3).
2. Remove the lock nut(2), and then remove the washer
nozzle(1).
Installation
To install, follow the removal steps in the reverse order.
Rear Wiper Arm/Blade
Installation
Refer to the installation steps of the Rear Wiper Motor in
Wiper/Washer System section.
885RS008
Rear Washer Nozzle
Rear Washer Nozzle Angle
Adjustment
Loosen the lock nut(2) of the washer nozzle(1) to adjust
the injection angle of the cleaning fluid, and then retighten
the lock nut(2).
885RS005
885RS004