Oil Filter; Removal; Installation - Isuzu 2000 Trooper Workshop Manual

Removal

1. Disconnect battery ground cable.
2. Drain engine oil.
3. Remove oil filter using J-36390 filter wrench.

Installation

1. Clean filter fitting surface and apply small amount of
engine oil to sealing surface.
2. Install oil filter cartridge by hand until it comes in
contact with sealing surface then rotate additional 2/3
turn to tighten using J-36390 filter wrench.
Legend
(1) Oil Pump

(2) Oil Filter

(3) Oil Gallery
(4) From Filter
(5) To Filter
3. Fill engine oil until full level on dipstick.
4. Reconnect battery ground cable.
Oil Filter
050RW001
ENGINE LUBRICATION
6G–13