7B–46 MANUAL TRANSMISSION
17. Install the front cover.
1. Using installer J–42801, grip J–8092 and a
hammer, drive in a new oil seal.
Drive in depth (from cover end): 11.7
(0.46
0.02 in)
2. Apply grease to the seal lip.
18. Install the transfer adapter.
1. Using installer J –42802, and a hammer drive in a
new oil seal.
Drive in depth (from transfer adapter):
10.95
0.5 mm (0.431
2. Apply grease to the oil seal lip.
0.5 mm
220RW023
0.02 in)
220RW073
3. Install the oil receiver pipe.
4. Install the reverse restrict to the transfer adapter.
220RW011
226RW059