Installation; Removal - Isuzu 2000 Trooper Workshop Manual

Removal

1. Disconnect the battery ground cable.
2. Disconnect the connector, remove the vehicle speed
sensor body by rotating it and then remove the vehicle
speed sensor(1).
Removal
1. Disconnect the battery ground cable.
2. Remove the fuel tank(1).
Refer to the Fuel Tank removal steps in Engine
section
3. Disconnect the connectors, remove five screws and
then remove the fuel tank unit(2).
Vehicle Speed Sensor

Installation

To install, follow the removal steps in the reverse order,
noting the following point.
1. Tighten the vehicle speed sensor to the specified
Torque: 27 N·m (20 lb ft)
826RS009
Fuel Tank Unit
Installation
To install, follow the removal steps in the reverse order.
140RS006
METER AND GAUGE
torque.
8E–11