EXTERIOR/INTERIOR TRIM
8J–14
Door Mirror and Associated Parts
Legend
(1) Door Mirror Cover / Tweeter
(2) Door Mirror Connector
(3) Door Mirror
Removal
1. Disconnect the battery ground cable.
2. Remove the door mirror cover(1).
D Remove the connectors(2) and the door mirror
cover, if equipped with a tweeter.
3. Remove the door mirror connector.
4. Remove the door mirror.
Door Mirror
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. When you install the door mirror, install the bolt(1) to
the mirror temporarily, hook the bolt to the door side
hole and tighten the bolt from the inside.
720RS012
2. When installing the door mirror, hold the glass run
lip(2) between the door mirror base(3) and the center
sash(4).
3. Tighten the door mirror fixing bolts to the specified
torque.
Torque: 8 N·m (69 lb in)
720RS007
720RS001
A10RS001