Removal - Isuzu 2000 Trooper Workshop Manual

BODY STRUCTURE
8F–60
Parts Location
Legend
(1) Rear Door Side Moulding

Removal

1. Disconnect the battery ground cable.
2. Remove rear door side moulding.
3. Remove rear door upper moulding.
4. Remove rear door corner moulding.
D Avoiding the weatherstrip (3), pry the moulding (2)
out from the door frame (1).
Rear Door Moulding
(2) Rear Door Corner Moulding
(3) Rear Door Upper Moulding
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Install each moulding with no clearance between
each piece of moulding.
2. Assemble the edge portion (A portion) of the
moulding so that the clearance between the rear side
moulding and the waist seal is 1 mm (0.04 in).
645RS004
645RS003