Anti-Theft Horn Installation; Engine Hood Switch Removal; Engine Hood Switch Installation - Isuzu 2000 Trooper Workshop Manual

5. Remove the instrument panel cluster assembly(4).
D Refer to the Instrument Panel Assembly in Body
Structure section.
6. Remove two screws and then remove the anti-theft
indicator(5).
Anti-theft Indicator Installation
To install, follow the removal steps in the reverse order.
Anti-theft Horn Removal
1. Disconnect the battery ground cable.
2. Disconnect the connector and remove the fixing bolt
to remove the anti-theft horn(1).

Anti-Theft Horn Installation

To install, follow the removal steps in the reverse order.

Engine Hood Switch Removal

1. Disconnect the battery ground cable.
2. Remove the cap(1).
3. Remove the lock nut(2).
4. Disconnect the connector(4).
5. Remove the engine hood switch(3).
821RW032

Engine Hood Switch Installation

To install, follow the removal steps in the reverse order.
828RS007
SECURITY AND LOCKS 8H–23
828RS011