Inspection - Isuzu 2000 Trooper Workshop Manual

7B–34 MANUAL TRANSMISSION

Inspection

1. Counter 5th gear radial clearance.
1. Install the following parts to the counter gear
shaft.
1. Counter 5th gear thrust washer pin (1).
2. Counter 5th gear thrust washer (2).
3. Counter 5th gear needle bearing( 3).
4. Counter 5th gear (4).
2. Mount the counter gear shaft through the
aluminum plate in vise.
3. Using a dial indicator, measure the counter 5th
gear radial clearance.
Standard: 0.015 – 0.068 mm
(0.00059 – 0.00268 in)
4. Using a inside dial indicator, measure the gear
inside diameter.
Standard: 38.015 – 38.040 mm
(1.49665 – 1.49763 in)
2. 5th-reverse shift arm and hub sleeve No.3 clearance.
1. Using a vernier caliper, measure the 5th-reverse
shift arm thickness.
Reference: 10.2 mm (0.402 in)
226RW088
2. Using a vernier caliper, measure the center
groove of hub sleeve No.3.
clearance between the hub sleeve No.3 and shift
arm.
Standard: 0.26 – 0.84 mm (0.0102 – 0.0331 in)
Reference: Center groove dimension 10.5mm
(0.413 in)
226RW183
226RW085
Calculate the
226RW086