Isuzu 2000 Trooper Workshop Manual page 1910

Parts Location
Legend
(1) Nylon Washer
Removal
1. Disconnect the battery ground cable.
2. Remove door mirror.
D Refer to Door Mirror in this section.
3. Remove front door waist seal.
D Remove the fixing screw and pull out the waist seal
(1) from the door frame while prying it up.
Front Door Waist Seal
(2) Door Mirror
(3) Front Door Waist Seal
Installation
To install, follow the removal steps in the reverse order,
noting the following point.
1. Apply soap and water to the inside of the waist seal
631RS010
BODY STRUCTURE
and align the screw hole of the waist seal to the door
panel hole, and gently tap the seal with a rubber
hammer.
Be sure not to tap the seal hard. This may result in
deforming the seal.
8F–61
631RS009