Front Exhaust Pipe and Associated Parts
Legend
(1) Front Exhaust Pipe RH Fixing Nuts
(2) O
Sensor Terminal Connector
2
(3) Front Exhaust Pipe RH Fixing Bolts and Nuts
(4) Front Exhaust Pipe Fixing Bolts and Nuts
(5) O
Sensor Terminal Connector
2
Removal
1. Disconnect battery ground cable.
2. Raise the vehicle and support with suitable safety
stands.
3. Disconnect
O
sensor
2
(2)(5)(7)(9).
4. Remove front exhaust pipe fixing nuts (3)(4).
5. Remove front exhaust pipe fixing three stud nuts from
exhaust manifold (1)(8).
6. Remove front exhaust pipe (6)(10).
Front Exhaust Pipe
harness
connector
ENGINE EXHAUST
(6) Front Exhaust Pipe LH
(7) O
Sensor Terminal Connector
2
(8) Front Exhaust Pipe LH Fixing Nuts
(9) O
Sensor Terminal Connector
2
(10) Front Exhaust Pipe RH
Installation
1. Install front exhaust pipe (10)(6) and tighten three
stud nuts (1)(8) and two nuts (3)(4) to the specified
torque.
Torque
Stud Nuts : 67 N·m (49 lb ft)
Nuts : 43 N·m (32 lb ft)
2. Reconnect O
sensor harness connector (2)(5)(7)(9).
2
6F–3
150RY001