Front Seat Assembly; Removal; Installation - Isuzu 2000 Trooper Workshop Manual

SEATS
8G–2
Front Seat Assembly and Associated Parts
Legend
(1) Rear Cover

(2) Front Seat Assembly

(3) Seat Belt Warning Connector

Removal

1. Disconnect the battery ground cable.
2. Remove the front cover.
3. Remove the rear cover.
D Remove the cover fixing screw from the rear inner
cover, if this model is equipped with the power
seats.
4. Remove the door sill plate.
5. Remove the rear seat foot rest.
D Refer to the Rear Seat Foot Rest in this section.
Front Seat Assembly
(4) Rear Seat Foot Rest
(5) Door Sill Plate
(6) Riser Cover
(7) Front Cover
6. Remove the riser cover.
7. Remove the seat belt warning connector (Driver's
side only).
8. Remove the front seat assembly.
D Disconnect the power seat connector, if this model

Installation

To install, follow the removal steps in the reverse order,
noting the following points:
is equipped with the power seats.
750RY002