2/Using Your Appliance; Setting And Adjusting The Time; Stopping The Turntable - Brandt ME1255X User Manual

2/USING YOUR APPLIANCE

•SETTING AND ADJUSTING THE TIME

After hooking up your appliance or after an extended power outage, "1 2 : 0 0 " will flash in the
display.
To set the time on the clock
Press the +/- touch controls to set the time, e.g 6:30.
Confirm by pressing the MEMO touch control.
There is a beep to confirm that the time has been set.
To change the time
Press and hold the MEMO touch control for five
seconds.
The time display flashes.
Enter the new time (e.g. 7:30) by pressing the +/- touch
controls.
Confirm by pressing the MEMO touch control.
There is a beep to confirm that the new time has been
set.
:
Comments
If you do not press the MEMO touch control, the time adjustment is cancelled.

•STOPPING THE TURNTABLE

If you think that there is not enough space for your dish to rotate freely in the oven, programme
the STOP TURNTABLE FUNCTION before or durng the programme.
Note: It is not possible to stop the turntable during an automatic defrosting programme.
Programme
Press the + and - touch controls at the same time; the
turntable symbol changes.
To cancel this function, repeat the same procedure.
:
Comments
You must turn the cookware and stir its contents halfway through
the programme if the stop turntable function is activated.
9
EN
Display
1 2 : 0 0
0 6 : 3 0
Display
0 6 : 3 0
0 7 : 3 0
Display