GENERAL DESCRIPTION Turntable Wheel Function Start-Timer Turntable Door support selector open knob button button • THE TURNTABLE : ensures equal cooking of food throughout with no need to intervene. - It may be used as a cooking dish. - Rotation is controlled by the drive shaft and the wheel support. - The turntable rotates in both directions.
INSTALLATION Before connection • Check whether your oven has suffered any damage during transport (deformed door or door seal, etc.). If you see any signs of damage, contact your dealer before use. • Verify the power voltage. If there is a PERMANENT undervoltage (200-210 volts), consult your electrical installer.
Page 3
RECOMMENDATIONS • Your appliance is designed exclusively for the domestic purposes of defrosting, heating or cooking foods. The manufacturer bears no responsibility in the case of improper usage. • Before use, make sure that the containers are appropriate for microwave usage (e.g.: heat resistant glass, porcelain, etc.).
USING YOUR MICROWAVE OVEN Program your microwave oven using the function selector knob, together with the start-timer. After connecting your microwave oven : - Open the door, place the food to be cooked inside the microwave oven and close the door. Make sure the door is properly closed otherwise the oven will not operate.
MICROWAVE POWER SETTINGS Symbol Function Application Set the function selector knob to this position to TIMER use the timer function (sans cuisson). To keep dishes warm, bring butter, cream, KEEP cheese, ice cream, or any other delicate food WARM to the right temperature, or defrost it. DEFROST To defrost all frozen food, to top off cooking of delicate dishes or to cook very slowly.
Page 6
CARE & CLEANING • Regular maintenance of your oven will keep it in sound operating condition. To prevent heavy soiling, it is preferable to cover recipients whenever possible. Failure to clean the appliance regularly may damage its surfaces, reduce durability and lead to hazardous operation. •...
Need help?
Do you have a question about the MM210 and is the answer not in the manual?
Questions and answers