Table of Contents
Advertisement
Installation
UNPACKING
When you receive the appliance, unpack it or
have it unpacked immediately. Check its general
appearance. Make a note of any reservations on
the delivery slip and keep a copy.
CHOICE OF LOCATION AND BUILDING IN
This appliance must be installed in a cabinet column as shown in the installation diagram.
Centre the oven in the cabinet so as to ensure a minimum gap of 10mm between the appliance and the
surrounding unit. The unit supporting the appliance must be made of heat-resistant material (or covered
with a heat-resistant material).
For greater stability, attach the oven to the unit with 2 screws through the holes provided on the side
panels.
8
x1
x2
3.5 x 9.5 mm
x1
x2
4 x 13 mm
xxxxxxxx
xxxx MHz
xxxx W
xxxxxxxxx
xxx-xxxV ~ xxHz
N: xx-xx-xxxxx
Service conso.
Cl.B - Gr.2
Made in France
100
Advertisement
Table of Contents
