Service Factory Mode; Details Of The Service Factory Menu; Service Factory Mode Transition Chart; How To Enter/Exit Service Factory Mode - Pioneer krp-m01 Service Manual

1

6. SERVICE FACTORY MODE

6.1 DETAILS OF THE SERVICE FACTORY MENU

A
Operations during Service Factory mode are described here.
Before entering Factory mode of the PDP, make sure that the "HD AV Converter" setting on the PDP menu is set to "Disable."
If it is set to "Enable," change it to "Disable" then enter Factory mode.
To confirm the "HD AV Converter" setting on the PDP menu, proceed as follows:
Select HOME MENU, Option, then HD AV Converter in HDMI Control Setting.
Note: If "HD AV Converter" is set to "Enable," the video/audio signals will not be displayed/output even if external equipment
is connected via input connectors other than INPUT 4 of the PDP.
B

[1] SERVICE FACTORY MODE TRANSITION CHART

• The function is changed.
C
• The signal mode is changed.
D

[2] HOW TO ENTER/EXIT SERVICE FACTORY MODE

E
How to enter Service Factory Mode
By using a PDP service remote control)
• PDP service remote control
By issuing RS-232C commands )
• During normal Standby mode
• During normal operation mode : Issue [FAY].
How to exit Service Factory Mode
By using a PDP service remote control)
• PDP service remote control : press [FACTORY] key.
• Supplied remote control unit : press [HOME MENU] key.
By issuing RS-232C commands)
• Issue [FAN].
F
80
1
2
Standby mode
POWER
[POF]
(MR INFORMATION)
PANEL MAIN FACTORY
: Press [FACTORY] key.
: Issue [PON] then [FAY].
2
3
INFORMATION
PANEL FACTORY
OPTION
INITIALIZE
How to enter Service Factory Mode by Using the
supplied Remote Control Unit
• From this model, can not enter the Service Factory Mode
by operating the supplied remote control unit keys.
KRP-M01
3
4
Power supply ON mode
FACT FACT
[FAY] HOME MENU
[FAN]
Effective IR in Factory mode
RS-232C Factory mode
[ (MUTING)]
Effective 232C
command in Factory mode
4