Download  Print this page

Advertisement

1
A
When Replacing the F PANEL Assy (E)
When replacing the F PANEL Assy (E), discard the following parts of the new Assy kit for service and use the parts from the original door panel:
No.18
Door catcher
No.19
Door base
No.21
Door cushion
Reassembly Procedures for the Door Panel Service Kit
• Component parts of the GXX1283 Door Panel Service Kit
No.18
Door catcher (x2)
B
No.19
Door base (x1)
No.20
Door panel (x1)
No.21
Door cushion (x2)
1
Check that two marks of pinpoint gates do not protrude from the surface of the door base to which the door panel is to be attached.
Do NOT peel off the protective film of the door base in this step.
Peel it off after all the reassembly procedures are completed.
C
Protective film
Pinpoint
gate
2
Attach the two door catchers.
D
Door catcher
3
Peel off the separator of double-back tape on the door panel.
Do NOT peel off the protective film on the exterior surface of the door panel in this step.
Peel it off after all the reassembly procedures are completed.
E
F
130
1
2
Door base
Pinpoint
gate
Door base
Door catcher
KRP-M01
2
3
Pinpoint
gate
Door catcher
3
4
Door catcher
4

Advertisement

Table of Contents

   Related Manuals for Pioneer krp-m01

Comments to this Manuals

Symbols: 0
Latest comments: