Factory Hierarchical Table - Pioneer krp-m01 Service Manual

1
A

[6] FACTORY HIERARCHICAL TABLE

Large Item
Middle Item
6.2 [1] INFORMATION
[1-1] VERSION (1)
[1-2] VERSION (2)
[1-3] VERSION (3)
[1-4] MAIN NG
[1-5] TEMPERATURE
[1-6] HOUR METER
[1-7] HDMI SIGNAL INFO 1
B
[1-8] HDMI SIGNAL INFO 2
[1-9] VDEC SIGNAL INFO 1
[1-10] VDEC SIGNAL INFO 2
6.2 [2] PANEL FACTORY (+) (*2)
[2-1] PANEL INFORMATION
[2-2] PANEL WORKS
[2-3] POWER DOWN
[2-4] SHUT DOWN
[2-5] PANEL-1 ADJ (+)
[2-6] PANEL-2 ADJ (+)
[2-7] PANEL FUNCTION (+)
[2-8] ETC (+)
[2-9] RASTER MASK SETUP (+)
C
[2-10] PATTERN MASK SETUP (+)
[2-11] COMBI MASK SETUP (+)
6.2 [3] PANEL MAIN FACTORY (+) (*2)
[3-1] PM NG INFO
[3-2] PM STATE INFO
[3-3] DP_RX INFO
[3-4] PM_SETUP (+)
6.2 [4] OPTION
[4-1] CH PRESET <=>
[4-2] Digital AFT <=>
[4-3] SYNC DET (+)
[4-4] CTI (+)
D
6.2 [5] INITIALIZE
[5-1] SIDE MASK LEVEL (+)
[5-2] FINAL SETUP
[5-3] DTB SERVICE MODE
[5-4] Wide XGA AUTO <=>
[5-5] AUTO ADJUST. <=>
(*1): Exit the Service Factory Menu and enter the Digital Tuner Service menu.
(*2): For details on the setting items, refer to the Service manual of the PLASMA DISPLAY (KRP-600P, KRP-500P).
E
F
84
1
2
Variable / Adjustment Range
Small Item
CLEAR <=> NO <=> YES
CLEAR <=> NO <=> YES
DISABLE <=> ENABLE
DISABLE <=> ENABLE
SIDE MASK LEVEL <=>
DATA RESET <=> NO <=> YES
MODE SHIFT <=> NO <=> YES
DISABLE <=> ENABLE
AUTO ADJUST. <=> NO <=> YES
KRP-M01
2
3
Remarks
Exclusively used for production line
Exclusively used for production line
for the technical analysis
for the technical analysis
for the technical analysis (*1)
for the technical analysis
3
4
4