Download  Print this page

Advertisement

1
A
(2) Procedures for USB updating
Connect a USB memory device, then plug in the AC power cord.
On the MR
MR: AC OFF
LED
B
Connect a USB
memory device.
MR: AC OFF
LED
Plug in the AC
power cord.
MR: Power ON
LED
C
MR: Orange LED ON
LED
MR: System Standby
LED
LED
D
Note: If you interrupt the updating procedure in this step, updating is not
started, and normal startup will begin.
NEVER use the remote control unit. (Especially DO NOT use the Power
key.)
[If you use any key on the remote control unit in Steps 5 to 7]
If the unit does not shift to Step 8, disconnect the USB memory device
then try the procedures from the beginning.
If the unit shifts to Step 8, continue the updating procedures as described.
E
MR: Performing USB updating
LED
F
118
1
2
On the Panel
Panel: MR AC OFF
LED
Panel: MR AC OFF
LED
Panel: Screen ON
LED
Screen (ON)
Panel: Screen ON
LED
Panel: Screen OFF
LED
Screen (OFF)
[If you use any key on the remote control unit in Steps 4 to 6]
If the unit does not shift to Step 7, disconnect the USB memory device
then try the procedures from the beginning.
If the unit shifts to Step 7, continue the updating procedures as described.
Panel: Screen OFF
LED
KRP-M01
2
3
(2) Procedures for USB updating
Connect a USB memory device, then plug in the AC power cord.
On the MR
MR: AC OFF (All LEDs unlit)
MR: No status change
MR: Power ON
MR: Orange LED ON
MR: System Standby
MR: Performing USB updating
3
4
LED
Connect a USB
memory device.
LED
Plug in the AC
power cord.
LED
LED
LED
LED
4

Advertisement

Table of Contents

   Related Manuals for Pioneer krp-m01

Comments to this Manuals

Symbols: 0
Latest comments: