Table of Contents
Advertisement
2.2. Port status
This page provides current status of every port and the negotiation result.
State:
Link Status:
Auto Negotiation:
Speed status:
Duplex status:
Flow Control:
Rate Control:
Port Security:
Config:
Actual:
NP2624M User Guide
YML827 Rev1
Displays the port status: On or Down. "Unlink" will
be treated as "off".
Displays the link status. Down means "No Link", Up
means "Link".
Displays the auto negotiation mode: auto/force/
Nway-force.
Displays the speed, port 1- 24 are 10/100Mbps, Port
25-26 are 10/100/1000Mbps.
Displays full-duplex or half-duplex mode.
Full: Displays the flow control is enabled or disabled
in full mode.
Half: Displays the backpressure is enabled or
disabled in half mode.
Displays the rate control setting.
Ingr: Displays the port effective ingress rate of user
setting.
Egr: Displays the port effective egress rate of user
setting.
Displays the port security is enabled or disabled.
Displays the state of user setting.
Displays the negotiation result.
11
Advertisement
Table of Contents
