NetComm NP2624M User Manual page 41

2.5.12 802.1x Configuration
System Configuration
802.1x makes use of the physical access characteristics of IEEE802 LAN infrastructures in order to
provide a means of authenticating and authorizing devices attached to a LAN port that has point-to-
point connection characteristics, and prevent access to that port in cases where the authentication
and authorization process fails.
To enable 802.1x, from Administrator \Switch setting \Advanced then fill in the authentication
server information:
Radius Server IP Address:
Server Port:
Accounting Port:
Shared Key:
NAS, Identifier:
Perport Configuration
In this page, users can select the specific port and configure the Authorisation State.
Each port can select four kinds of Authorisation State:
NP2624M User Guide
YML827 Rev1
The IP address of the authentication server.
The UDP port number used by the authentication
server to authenticate.
The UDP port number used by the authentication
server to retrieve accounting information.
A key shared between this switch and authentication
server.
A string used to identify this switch.
41