Table of Contents
Advertisement
Configuring Setup Setting
There are five items, including Port Settings, VLAN Settings, Trunk Settings, Mirror Settings, and PoE Settings
in Setup menu.
Port Settings
In the Port Settings menu (Figure 18), this page will display each port's status. Press the ID parameter to set
each port's Speed, Flow Control, QoS and Link Status. When you need to renew the posted information, press
the "Refresh" button.
The Link Status in the screen will display the connection speed and duplex mode; otherwise this dialog box
will display down when the port is disconnected.
To change the port setting, click on the ID parameter to enter the selected port to configure its Speed/Disable
and Flow control.
NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide
YML842 Rev1
Figure 18. Port Configuration
Figure 19. Port Settings.
25
Advertisement
Table of Contents
