Connecting A Pc Or Terminal To The Rs-232 Port; Terminal Emulation Setup Program; Logging On To The Switch; Web-Based Configuration - NetComm NP2724M User Manual

Vlan managed switch

Hide thumbs Also See for NP2724M:

Table of Contents

Web-Browser

You can manage the switch through a web connection by connecting to the

switch's IP address using your web browser.

NP2724M default IP address:

Default User Name: admin

Default Password: (blank)

This User Guide provides instructions on how to configure the switch using

the console interface. Read the following sections to start up!

2.7.1.

Connecting a PC or Terminal to the RS-232 Port

When you are ready to configure the Management Function of the switch,

make sure you have connected the supplied RS-232 serial cable to the RS-

232 port at the front panel of your switch and your PC.

2.7.2.

Run a terminal emulation program with the following setting.

Emulation: VT-100 compatible

Baud per second: 38400

Data bits: 8

Parity: None

Stop bits: 1

Flow Control: None

2.7.3.

Enter the factory default user name "admin" with no password when logging

on to the switch. The password is set to be empty. If you can enter "?" on the

command line screen, it will display all items so that you can configure by your

requirements.

The Switch provides a Web-based interface for configuring and managing the

NP2724M User Manual

http://192.168.1.254

Table of Contents