Table of Contents
Advertisement
4. LACP Work Port Num: Defines the maximum number of ports that can be aggregated
at the same time. If local static trunk group, the number must be the same as group
member ports.
NOTE:
Before changing settings on this page, you have to set trunk group
on the page of Trunk Configuration first.
4.3.4.2. State Activity
1. Select <Edit>.
2. Press the Space key to choose the item.
Active: The port automatically sends LACP protocol packets.
Passive: The port does not automatically send LACP protocol packets, and responds
only if it receives LACP protocol packets from the opposite device.
3. Press Ctrl+A go back action menu line.
4. Select <Save> to save configured values.
NOTE:
If a user sets LACP mode in the trunk group, all of the member ports
of this trunk group will set "Active" automatic.
NP2624M User Guide
YML827 Rev1
99
Advertisement
Table of Contents
