4.2.8.2. Filtering MAC Address
MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the
destination addresses.
In this page users can add /modify /delete a MAC address filter.
Add filter MAC address
1. Press <Add> > <Edit> key to add a MAC address filter.
2. MAC Address: Type the MAC address to filter.
3. Vlan ID: If tag-based (802.1Q) VLAN are set up on the switch, type the VID to
associate with the MAC address.
4. Press Ctrl+A to go back to the action menu line, and then select <Save> to save all
configured values.
NP2624M User Guide
YML827 Rev1
87