NetComm NP2624M User Manual page 19

Priority Queue Service settings:
First Come, First Serve:
All High before Low:
WRR:
QOS Policy:
2.5.2.2 Miscellaneous Configuration
Collisions Retry Forever:
Hash Algorithm:
IFG Compensation:
802.1x Protocol:
NP2624M User Guide
YML827 Rev1
The sequence of packets sent is depending on the
arrival order.
The high priority packets are sent before the low
priority packets.
(Weighted Round Robin) Select the preference given
to packets in the switch's high-priority queue. These
options represent the number of high priority packets
sent before one low priority packet is sent. For
example, 5 High:2 Low means that the switch sends
5 high-priority packets before sending 2 low- priority
packets.
High Priority Levels: 0~7 priority level can be
mapped to a high or low queue.
Disable – In half duplex, the collision-retry
maximum is 48 times and packet will be dropped if
collisions still happen.
Enable – In half duplex, there is no collision-retry
limit. Retry will be attempted indefinitely.
Choose algorithms, CRC-Hash or DirectMap, to
maintain MAC address table.
Enable or disable inter-frame gap (IFG)
compensation.
Enable or disable 802.1x protocol.
19