NetComm NP2624M User Manual page 109

7. Once saved, the image file will automatically update.
8. Restart switch.
4.6.2. Restore Configure File
This page allows the user to restore EEPROM value, save previous image file, from TFTP server.
1. Start the TFTP server.
2. Press <Edit> on this page.
3. TFTP Server: Type the IP of TFTP server.
4. Remote File Name: Type the image file name.
5. Press Ctrl+A go to action line.
6. Press <Save> key, it will start to download the image file.
7. Once saved, the image file will automatically update.
8. Restart switch.
4.6.3. Backup Configure File
This page allows the user to save the current EEPROM value to an image file. Then restore the
EEPROM value from the update configuration page.
1. Start the TFTP server.
2. Press <Edit> on this page.
3. TFTP Server: Type the IP of TFTP server.
4. Remote File Name: Type the image file name.
5. Press Ctrl+A go to action line.
6. Press <Save> key, it will start to upload the image file.
7. Once saved, the image file will automatically update.
8. Restart switch.
NP2624M User Guide
YML827 Rev1
109