Table of Contents
Advertisement
4.3.1. RSTP
The Rapid-Spanning-Tree Protocol (RSTP) is a standardized method (IEEE 802.1w) for avoiding
loops in switched networks. RSTP is enabled, to ensure that only one path at a time is active
between any two nodes on the network.
4.3.1.1. Enable/Disable RSTP
This page allows the user to enable or disable the Spanning Tree function. Press the Space key to
select enable or disable.
4.3.1.2. RSTP System Configuration
1. You can view spanning tree information about the Root Bridge on the left.
2. On the right, users can set new values for the RSTP parameter.
NOTE:
For more information on parameter descriptions please see section
2-4-8.
90
NP2624M User Guide
YML827 Rev1
Advertisement
Table of Contents
