Table of Contents
Advertisement
4.3.1.3. Per port Configuration
1. PortState: Displays spanning tree status about the switch which per port is forwarding or
blocking.
2. Select <Edit>.
3. PathCost: Specifies the path cost of the port that the switch uses to determine which
ports are the forwarding ports.
4. Priority: The Priority Port allows you to make it more or less likely to become the root
port.
5. EdgePort: If the port connected to a device does not understand STP or RSTP, you can
set as "No". This means the switch will stay in the forwarding state.
6. Press Ctrl +A to go back to the action menu line.
7. Select <Save> to save all configured values.
8. On the action menu line you can press <Next Page> to configure port9 ~ port26, press
<Previous Page> return to last page.
NOTE:
For more information on parameter descriptions please see section
2-4-8.
NP2624M User Guide
YML827 Rev1
91
Advertisement
Table of Contents
