Contents - Vertical MBX IP User Manual

Forwarding Calls
To activate Custom or Pre-Defined Message Forward:
1. Press TRANS/PGM,
2. Dial User Program feature code 41,
3. Dial the one-digit LCD Message code (0-9),
4. Dial any auxiliary input for messages 1-4 and 6-8,
5. Press HOLD/SAVE, forward confirmed.
To cancel activated Message:
1. Press the Fwd Soft button,
2. Press FWD button or dial 554,
3. Dial #.
To program the Station Custom Message (00) at your station:
1. Press TRANS/PGM,
Fot UNI/STS/Triad/infinite phones:
Press the FWD button.
2. Dial User Program feature code 42,
3. Enter Message contents, up to 24 characters, using the Character Entry Chart below.
4. Press HOLD/SAVE, to save message
Release 1.7
MBX IP Station User Guide
Chapter 2: BASIC CALL HANDLING
2-17
April 2012