Assembly - Sears free spirit C 249 30427 1 Owner's Manual

1
ASSEMBLY INSTRUCTIONS
STEP 1
Remove all the components from the carton.
See figure 1
STEP 2
Connect the lower computer cable (72) to the extension computer cable (71)
from the right upright (4R).
See figure 2
STEP 3
Lift the right upright (4R) into the frame base (2). Fasten the right upright
(4R) to the frame base (2) using four round bolts (73), three flat washers
(105) and one curve washer (106) using the allen wrench (109).
Repeat for the left side.
See figure 3
STEP 4
Connect the speed adjustment switch cable (59R) from the right upright
(4R) to the extension speed cable (63).
Slide the right handgrip tube (5) into the right upright (4R). Secure using
two round head bolts (73) using the allen wrench (109).
Connect the incline adjustment switch cable (59L) from the left upright (4L)
to the extension incline cable (61).
Slide the left handgrip tube (5) into the left upright (4L). Secure using two
round head bolts (73) using the allen wrench (109).
See figure 4 and 5
STEP 5
Connect the extension speed cable (63) to the speed cable (62) from the
console assembly.
Connect the extension computer cable (71) to the computer cable (70) from
the console assembly.
Connect the extension incline cable (61) to the incline cable (60) from the
console assembly.
Connect the extension auto fold cable (65) to the extension auto fold cable
(64) from the console assembly.
See figure 6
STEP 6
Fasten the console assembly onto the right and left uprights (4 R / L) with
two round head bolts (73) using the allen wrench (109).
ENSURE THAT ALL NUTS AND BOLTS ARE FIRMLY TIGHTEN
2 3
4
5
6
7
8
5