Assembly - Sears PRO-FORM 630DS User Manual

ASSEMBLY
Assembly requires two people. Set the treadmill m a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the Included alien wrenc_
and your own phillips screwdriver (]i_ ==,=- .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
smaU amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance, if there Is lubdcant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1.
With the help of a second person, carefully raise the
treadmill to the upnght position.
While a second person tips the treadmill to one side and
holds it, insert one of the Extension Legs (103) into the
treadmill as shown. Make sure that the Extension Leg is
turned so the Base Pad (97) is on the bottom.
Next, tip the treadmill to the other side and insertthe
other Extension Leg (not shown) in the same way. Lower
the side of the treadmill so that both Extension Legs
(103) are resting flat on the floor.
1
2. With the help of a second person, carefully hp the
Uprights (82) down as shown. Make sure that the
Extension Legs (103) remain in the Uprights.
Attach each Extenston Leg (103) with two Screws (76)
as shown.
With the help of a second person, carefully tip the
Uprights (82) back to the vertical pos=tJon.