Do you have a question about the SPACEMAKER 1000LS and is the answer not in the manual?
Questions and answers
V j
February 13, 2025
I have the Sapce Maker 1000LS treadmil and the display on council does not turn on, new batteries were installed. How can I fix that?
1 comments:
Mr. Anderson
February 13, 2025
If the display on the Sears SpaceMaker 1000LS treadmill does not turn on after installing new batteries, follow these steps:
1. Ensure the power cord is properly plugged into a grounded outlet and surge protector. 2. Confirm that the key is fully inserted into the power switch. 3. Press the ON/CLEAR button or start the walking belt to turn on the display. 4. If the issue persists, check the batteries to ensure they are properly installed and use fresh alkaline AA batteries.
If the problem continues, contact the toll-free HELPLINE at 1-800-736-6879 for further assistance.
Need help?
Do you have a question about the SPACEMAKER 1000LS and is the answer not in the manual?
Questions and answers
I have the Sapce Maker 1000LS treadmil and the display on council does not turn on, new batteries were installed. How can I fix that?
If the display on the Sears SpaceMaker 1000LS treadmill does not turn on after installing new batteries, follow these steps:
1. Ensure the power cord is properly plugged into a grounded outlet and surge protector.
2. Confirm that the key is fully inserted into the power switch.
3. Press the ON/CLEAR button or start the walking belt to turn on the display.
4. If the issue persists, check the batteries to ensure they are properly installed and use fresh alkaline AA batteries.
If the problem continues, contact the toll-free HELPLINE at 1-800-736-6879 for further assistance.
This answer is automatically generated