Folding - Sears free spirit C 249 30427 1 Owner's Manual

FOLDING AND MOVING YOUR
TREADMILL

Folding

Press and hold the auto-fold switch of the left upright and
also press the "up" button found on the monitor or the left
handgrip tube. The treadmill will stop beeping once the
treadmill is completely in the fold up position.
Note: Should you release the auto-fold switch you
simply holding the auto-fold switch and pressing the
"up" or "down" button to resume the feature.
The treadmill will sound warning beeps if the treadmill
folding degree is less than 60.
Unfolding
Press and hold the auto-fold switch of the left upright and
also press the "down" button found on the monitor or the
left handgrip tube. The treadmill will stop beeping once
the treadmill is completely in the fold down position.
Note: The treadmill will not operate if the treadmill is
not completely in the fold down position.
Note: Should you release the auto-fold switch you simply
holding the auto-fold switch and pressing the "up" or
"down" button to resume the feature.
The treadmill will sound warning beeps if the
treadmill folding degree is less than 60.
Moving
Before moving the treadmill, fold the treadmill to the
stored position as described above. Hold the handgrip
tubes and carefully move the treadmill to your desired
location.
To reduce the risk of injury, use extreme caution while
moving the treadmill, do not attempt to move the
treadmill over an uneven surface.
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct
sunlight. Do not leave the treadmill in the storage
position in temperatures above 85 degrees
Fahrenheit.
13