Table of Contents
Advertisement
State Activity
Active (select): The port automatically sends LACP protocol packets.
Passive (no select): The port does not automatically sends LACP protocol packets, and responds only if it receives
LACP protocol packets from the opposite device.
1. A link having either two active LACP ports or one active port can perform dynamic LACP trunking. A link has two
passive LACP ports will not perform dynamic LACP trunking because both ports are waiting for and LACP protocol
packet from the opposite device.
2. If you are active LACP's actor, when you are select trunking port, the active status will be created automatically.
24VDSL+2Giga Ethernet Managed 4 Band VDSL IP DSLAM USER'S MANUAL Ver. A.4
37
Advertisement
Table of Contents
