Dynamix DV-24 User Manual page 36

Aggregator setting
System Priority: A value used to identify the active LACP. The switch with the lowest value has the highest priority
and is selected as the active LACP.
1. Group ID: There are seven trunk groups to provide configure. Choose the "group id" and click "Get".
2. LACP: If enable, the group is LACP static trunking group. If disable, the group is local static trunking group. All
ports support LACP dynamic trunking group. If connecting to the device that also supports LACP, the LACP
dynamic trunking group will be created automatically.
3. Work ports: Allow max four ports can be aggregated at the same time. If LACP static trunking group, the exceed
ports is standby and able to aggregate if work ports fail. If local static trunking group, the number
must be as same as the group member ports.
4. Select the ports to join the trunking group. Allow max four ports can be aggregated at the same time.
5. If LACP enable, you can configure LACP Active/Passive status in each ports on State Activity page.
6. Click Apply.
24VDSL+2Giga Ethernet Managed 4 Band VDSL IP DSLAM USER'S MANUAL Ver. A.4
35