Spanning Tree - Dynamix DV-24 User Manual

24VDSL+2Giga Ethernet Managed 4 Band VDSL IP DSLAM USER'S MANUAL Ver. A.4

4.4.7 Spanning Tree

The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoiding loops in switched networks.
When STP enabled, to ensure that only one path at a time is active between any two nodes on the network.
You can enable Spanning-Tree Protocol on web management's switch setting advanced item, select enable
Spanning-Tree protocol. We are recommended that you enable STP on all 24 ports VDSL IP DSLAM to ensure a
single active path on the network.
You can view spanning tree information about the Root Bridge.
You can view spanning tree status about the switch as the following screen.
You can set new value for STP parameter
49