Part 9. Adding Cards To The System; Adding Stations - Samsung OfficeServ 7030 Installation Manual

OfficeServ 7030
TECHNICAL MANUAL

PART 9. Adding Cards to the System

9.1 Adding Stations

1) Power the OfficeServ 7030 OFF before adding a new card. Locate a suitable empty card
slot. Having located a suitable slot, insert the new card into the slot and push firmly in the
middle of the card to ensure that it is fully inserted into the back plane connector.
2) After the new cards are inserted, power the system on and let it boot up. Now the system
must be told to recognize the new cards. This is done through the use of MMC 806 Card
Pre-Install. Use this MMC for each new card that is installed.
3) The new cards must be assigned directory numbers according to the system numbering
plan in MMC 724. The technician must know the software port assignments of the new
cards so the ports can be assigned correct numbers.
9.1
Home Page
INSTALLATION
PART 8 MAY 2010