Table of Contents
Advertisement
ASSEMBLING YOUR KEYSET
•
Place the keyset face down on a flat surface.
•
Remove the base pedestal by placing your thumbs over the attachment
clips and press outward while simultaneously pressing down on the key-
set body with your fingertips.
•
Plug the handset cord into the jack marked with the
•
Route the handset cord out the RIGHT side of the keyset as you look at
it face down.
•
Reattach the base pedestal.
•
Plug the line cord into the jack on the base of the keyset marked with the
symbol and route it through one of the cable channels in the bottom
of the base pedestal.
10
•
•
symbol.
•
•
ADDING A KEYSET
DAUGHTERBOARD MODULE
Place the keyset face down on a flat surface.
Remove the base pedestal by placing your thumbs over the attachment
clips and press outward while simultaneously pressing down on the key-
set body with your fingertips.
Remove the two knockouts from the bottom of the keyset.
Plug in the daughter module and secure with the two screws provided.
REMOVE
KNOCKOUTS
SECURING
SCREWS
11
Advertisement
Table of Contents
