Wall-Mounting Smt-I5200 Series Keysets - Samsung OfficeServ 7030 Installation Manual

OfficeServ 7030
TECHNICAL MANUAL

6.2.6.3 Wall-Mounting SMT-i5200 Series Keysets

Assemble the wall-mount bracket where you want to use the phone. The wall-mount bracket
is an optional item.
To install the wall-mounting bracket follow the steps below:
1. First, choose the location where you want to install the phone, and then determine the
positions of the screws by placing the phone at the target location on the wall.
2. Remove the desk cradle of the phone.
a. Fix one latch of the cradle to the
top or bottom groove of the
phone.
b. Push the remaining latch into
the remaining groove on the
opposite side.
3. Insert the wall-mount bracket as shown
in the figure.
4. Pull out the handset rack, and then insert
it in the opposite direction, as shown in
the figure.
Only the up-down direction changes.
The front-back remains unchanged.
5. Install the phone on the wall.
6.14
Home Page
INSTALLATION
PART 6 MAY 2010