OfficeServ 7030
TECHNICAL MANUAL
2.2.4 Mounting Daughter Boards
The following daughter boards can be mounted on the slots according to the OfficeServ 7030
configuration.
Part
Trunk Part
Subscriber Part
The 4TM Module board does not support the Dial Pulse dialing, but it supports the DTMF
dialing.
Caution for the power supply when mounting the boards
Check if the cabinet power is turned off when mounting the board. Inserting or removing a
board while the power is turned on may damage the board or cause fire.
Table 2.3 Mountable Boards
Slot
Mountable Board
Slot 4
4TM only
Slot 2 and Slot 3
4DM, 2DM, 4SM, 4LM
s
l
Figure 2.9 Location of the Base Board Slots
2.7
PART 2 MAY 2010
s
l
s
l
SLOT 2
SLOT 1 (Fixed)
SLOT 4
Home Page
INSTALLATION
SLOT 3