Samsung OfficeServ 7030 Installation Manual page 79

OfficeServ 7030
TECHNICAL MANUAL
NOTE: Other types of iDCS, DS and ITP phones can be connected however the line keys
will have a different default button configuration.
Once the OfficeServ 7030 system is booted, the system verifies the cards mounted on each slot
and saves this information as the default configuration of the system. At default, the
OfficeServ 7030 system assigns 3 digits to CO lines, extensions, and extension groups.
CO line numbers from 701 through 704 are sequentially assigned (by default) to the first CO
line card installed in the system from left to right.
Extension numbers are assigned as follows at default. Embedded SLT Ports 1 and 2, 201 and
202 respectively. Extension numbers 203 through 2xx are sequentially assigned to ports.
Station ports in the system are numbered from left to right.
7.4
Home Page
INSTALLATION
PART 7 MAY 2010