OfficeServ 7030
TECHNICAL MANUAL
•
Prepare AOM to the set up mode
o Press and hold 2
mode.
o Press the 3
flashing.
o (Press the 2
flashing will default the AOM to the factory settings.)
•
Two methods to set up the AOM
o Use SMT-i5243 phone to set up the AOM.
o Use Web UI
key from the 1
nd
st
rd
key from the 4
th
column (right most columns) after this key is
rd
key from the 4
th
column (right most columns) after this key is
Enter SMT-i5243 phone to the engineering mode
•
Menu -> phone -> phone information -> *153#
•
Select Network -> AOM to enter into the set up mode
•
Enter the following data
o If IP setting is DHCP skip this step
IP address: (assign an AOM IP address)
Gateway: (from MMC 830)
Subnet Mask: (from MMC 830)
o Server IP Address: (OfficeServ IP address from MMC 830)
o (use navigation key to move to the following fields)
o Server ID: (ITP ID from MMC 840)
o Server Password: (ITP password from MMC 840)
o Server Port: 6000 (press * key twice to switch input
mode to numeric mode)
Type IP address with port 8080 in the address bar of IE browser. Default
AOM IP address is 10.0.0.3.
Ex.
•
http://10.0.0.3:8080
•
ID: admin
•
Password: samsung
Fill in the required data. Must enter the following information.
•
Server IP address is the OfficeServ MP IP address
o Ex. 192.168.1.10
column (left most columns) to enter the set up
6.21
Home Page
INSTALLATION
PART 6 MAY 2010