Attaching Add-On Modules (Aoms) To Keysets; Attaching Idcs 64 Button Modules To An Idcs Keyset; Figure 6.14 Attaching Idcs 64 Button Module To An Idcs Keyset - Samsung OfficeServ 7030 Installation Manual

OfficeServ 7030
TECHNICAL MANUAL

6.2.7 Attaching Add-On Modules (AOMs) to Keysets

6.2.7.1 Attaching iDCS 64 Button Modules to an iDCS Keyset

First, remove the base wedge from the iDCS 64 button module and attach the bracket to it
with two of the screws provided (see Figure 6.14).
Remove the base wedge of the keyset and place it to the right of the 64 button module and
attach the bracket/64 button module to the keyset with the remaining two screws.
The base wedge can now be replaced. NOTE: If you wish to attach two 64 button modules
to a keyset, connect the 64 button module together first and then attach them to the
keyset.

Figure 6.14 Attaching iDCS 64 Button Module to an iDCS Keyset

NOTE: The maximum number of 64 Button AOMs per station is 2. The maximum number of
AOMs per system is limited by the available DLI ports.
6.17
Home Page
INSTALLATION
PART 6 MAY 2010