Connecting Web Management - Samsung OfficeServ 7030 Installation Manual

OfficeServ 7030
TECHNICAL MANUAL

6.2.10 Connecting Web Management

The OfficeServ 7030 system is equipped with the Web Management web server, and supports
the remote access through the network. The system administrator can change the system
setting by accessing the Web Management with a browser.
This section describes how to access the OfficeServ 7030 system.
To use within an in-house network, connect LAN to the LAN port of the base board and try
accessing from a client PC.
Setting the Network parameter through the MMC830 program
Set the network parameter of the OfficeServ 7030 system. For the setting value of the network
parameter, contact the network administrator.
1) Set the IP address of the OfficeServ 7030 system.
2) Set the subnet mask of the OfficeServ 7030 system.
3) Set the gateway address of the OfficeServ 7030 system.
4) Reset the board.
Resetting the Board
To apply the new setting, the board must be reset.
6.30
Home Page
INSTALLATION
PART 6 MAY 2010