Rj-41-To-Rs-232 Adapter Cable (Optional); Status Indicators; Charging; Good Scan - Symbol PTC-960XRF User Manual

Table of Contents

RJ-41-to-RS-232 adapter cable (optional)

One of two adapter cables, part number 15109-

001 or 15508-001, may be

required to connect the PTC-

960XRF to an external accessory

or computer. One end of the cable plugs

into the accessory connector on the PTC's

left side, and the other

plugs into the accessory

or into an additional

cable for the specific

accessory or computer.

Cable part numbers are listed in

and cable diagrams are illustrated in

Four light-emitting diode (LED) indicators on

the rear face of the PTC-960XRF provide infor-

mation on the PTC's status.

This green LED glows when the PTC is con-

nected to a battery charger and the nickel-

cadmium battery pack is being recharged.

This green LED blinks once when a bar-code la-

bel has been scanned and decoded successfully.

You may also hear a beep after a successful scan.

The Good Scan indicator will not light if the bar

code has not been decoded, and the Scan indica-

tor will go out after 1 or 2 seconds.

Appendix

Table of Contents