PDT 8100 Series with Intel XScale Technology Product Reference Guide
Configuring the PDT 8146 (11 MB Radio)
Before the PDT 8146 can be used, it must be properly configured for the Spectrum24
Wireless LAN.
1. Select Settings from the Start menu.
2. Select Network Adapters from the Connections tab.
3. Select Spectrum 24 802.11b.
Network Adapters Properties
Tap Properties to view the current adapter IP configuration settings. DHCP (Dynamic
Host Configuration Protocol) obtains a leased IP address and network configuration
information from a remote server. An access point sends out a DHCP request searching for
a DHCP server to acquire the network configuration and firmware filenames.
9-4
Figure 9-1. Network Adapters