Front Panel - Shinybow USA SB-3690A Instruction Manual

FRONT PANEL

FRONT PANEL
1. POWER LED:
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving
power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last configuration will
be evoked.
2. TV VIDEO SYSTEM SELECT BUTTON:
Separate 1 thru 4 video system Output selection buttons are provided with LED displays for each TV
video system selection. (4) TV Video Systems: MTSC-M/N, PAL/NTSC-4.43, PAL-M (60Hz) and PAL-N (comb-n).
3. VGA RESOLUTION SELECT BUTTON:
Separate 1 thru 6 Output resolution selection buttons are provided with LED displays for each VGA
resolution selection. (6) VGA Resolutions: VGA (640x480) SVGA (800x600) XGA (1024x768), SXGA (1280x1024), WXGA (1366x768),
WUXGA (1920x1200)
4. HDMI RESOLUTION SELECT BUTTON:
Separate 1 thru 4 Output resolution selection buttons are provided with LED displays for each HDMI
resolution selection. (4) HDMI Resolutions: 480p, 720p, 1080i and 1080p.
5. IR SENSOR:
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
6. INPUT STATUS DISPLAY:
Input sources 1 to 4 LED illuminate blue to indicate that a video source is present select.
7. SOURCE SELECT BUTTONS:
Separate 1 thru 4 input selection buttons are provided for each source selection.
3