Advertisement
TYPICAL HOOKUP AND OPERATION
SB-3690
Front:
q
w
1. Power ON/OFF
2. Select Input Sources: Video, S-Video, PC
3. Select Video Output System:
• NTSC (3.58) NTSC (EIA-J)
• PAL (B.D.I.G.H.K)
• PAL-N
• PAL-N (COMB-N)
• PAL-M
OPERATION AND CONTENT
Front Panel
1. Power: press the button to turn ON/OFF. The LED will illuminate when the power is turned on.
2. Input Selection Buttons: Press each of buttons (PC/S-VIDEO/VIDEO) to select the desired input source.
3. Output Selection Buttons: Press each of buttons (NTSC-M3.58,J/,PAL-B,D,I, G,H,K,M,N,COMB-N), to select the desired output source.
4. Switch the converter on by depressing the on-off button on the front panel. The defaults to PC input converter and NTSC output
5. Pressing the buttons to select the correct TV system
6. If you have a VGA monitor connected, this will work automatically.
7. Start your video source playing, plus, if required, connect on your PC and you should now be able to view the picture on the TV and VGA simultaneously.
Back Panel
1.Output resolutions adjustment: There is a DIP SW on rear of the SB-3690 which allows you to change the output resolution The SB-3690 default is
640x480 You available resolutions are 640x480, 800x600, 1024x768 1280x1024, 1366x768, 1440x900, 1680x1050 and 1920x1200HD to your PC, TV, or
VGA monitor.
2. Support AV and SV output solutions: NTSC3.58, NTSC-EIA-J, PAL (B,D,I,G,H,K, PAL-M, PAL-N, PAL-N (COMB-N)
3. Power: Plug the 12VDC power supply into the unit and connect the adaptor to AC wall outlet.
Back:
q
e
1. Adjust Output Resolution:
2. Video Outputs: Video, S-Video, VGA (Maximum Output 1920x1200)
3. Video Inputs: Video, S-Video, VGA (Maximum Output 1280x1024)
4. DC 12V Input
3
w
0. 640x480
1. 800x600
2. 1024x768
3. 1280x1024
4. 1366x768
5. 1440x900
6. 1680x1050
7. 1920x1200 (HD)
r
e
Advertisement
